omaroo
March 2nd, 2008, 12:44 PM
This scope is ex Magellan Observatory and has been well looked after its whole life. Up to date and currently running latest AutoStar version 4.2g.
1) 12" Meade LX200GPS with UHTC (Ultra-High Transmission Coating)
2) Autostar II GOTO System incl. 12v cigarette lighter socket power cord
3) Meade Giant Field Tripod - shortened by approx. 8"
4) Meade 7x50 finderscope
5) Telrad finderscope
6) Meade 25mm Plossl EP
7) William Optics 2" diagonal with 1.25" adapter
8. Meade ZeroShift Electronic Micro-Focuser
9) Peterson Engineering 2" EyeOpener for Meade Micro-Focuser
10) Peterson Engineering Bucks Gears enhancement (fitted to Dec only)
11) Peterson Engineering Dec clutch upgrade
12) 12v corrector plate heater
13) Meade piggyback SLR camera mount for 12" LX200GPS
14) Flexible dew shield w/velcro tabs
15) Bob's Knobs collimation knobs
16) Losmandy machined piggyback mounting blocks x 2 for 12" LX200 - no plate though
17) Serial data cable for scope remote control and software updating
18) Wooden floor-sitting equatorial wedge. Set to -34 deg, but is slightly adjustable.
19) Meade soft carry case for 12" LX200. Zipper is broken, but can be easily replaced. It is slightly water stained (no scope inside at the time!!) but otherwise works well.
This telescope will come freshly tuned by Don Whiteman at Bintel.
Buyer pays transport. Pick up preferable from southern Sydney.
NOT included (from photos): William Optics 66mm guide scope, Meade 80mm guide scope, ToUcam, Nikon SLR or Meade SuperWedge (already sold).
$4,550.00 firm. Will not break up.
Thanks for looking
1) 12" Meade LX200GPS with UHTC (Ultra-High Transmission Coating)
2) Autostar II GOTO System incl. 12v cigarette lighter socket power cord
3) Meade Giant Field Tripod - shortened by approx. 8"
4) Meade 7x50 finderscope
5) Telrad finderscope
6) Meade 25mm Plossl EP
7) William Optics 2" diagonal with 1.25" adapter
8. Meade ZeroShift Electronic Micro-Focuser
9) Peterson Engineering 2" EyeOpener for Meade Micro-Focuser
10) Peterson Engineering Bucks Gears enhancement (fitted to Dec only)
11) Peterson Engineering Dec clutch upgrade
12) 12v corrector plate heater
13) Meade piggyback SLR camera mount for 12" LX200GPS
14) Flexible dew shield w/velcro tabs
15) Bob's Knobs collimation knobs
16) Losmandy machined piggyback mounting blocks x 2 for 12" LX200 - no plate though
17) Serial data cable for scope remote control and software updating
18) Wooden floor-sitting equatorial wedge. Set to -34 deg, but is slightly adjustable.
19) Meade soft carry case for 12" LX200. Zipper is broken, but can be easily replaced. It is slightly water stained (no scope inside at the time!!) but otherwise works well.
This telescope will come freshly tuned by Don Whiteman at Bintel.
Buyer pays transport. Pick up preferable from southern Sydney.
NOT included (from photos): William Optics 66mm guide scope, Meade 80mm guide scope, ToUcam, Nikon SLR or Meade SuperWedge (already sold).
$4,550.00 firm. Will not break up.
Thanks for looking